Mishimoto 10-ROW UNIVERSAL OIL COOLER KIT
25-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss
Includes either standard or thermostatic billet anodized aluminium sandwich plate
Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections
Includes 3/4″ -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models
Available in Sleek Silver or Stealth Black
Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation. This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form. The optional Mishimoto thermostatic sandwich plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached, making it ideal for those in cooler climates. The included core is our proven Mishimoto 10 row stacked plate cooler which can withstand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss. This kit includes both a 3/4″ -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models. This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak free connections. Whether you are piloting a boosted rotary or blown small block the Mishimoto universal oil cooler kit will provide the efficiency you need to stay on the track and out of the shop. As with all our products this kit includes the Mishimoto Lifetime Warranty.
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
NoteNo dashes = M20 x 1.5 — M20 x 1.52 dashes = 3/4″ -16UNF — 3/4″ -16UNF
Install Torque Specs15-25 ft/lbs (operating range) for all straight fittings and banjo bolts. Do not exceed the maximum torque rating of 35 ft/lbs.
CautionIt is the installer’s responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact email@example.com.
Core Size12.91 x 2.81
Purchase Includes(1) – 10 Row Oil Cooler (Silver or Black)(1) – 4ft 9in Stainless Steel Braided Hose w/ -10AN fittings– One straight fitting and one 90 degree swivel fitting(1) – 4ft .75in stainless Steel Braided Hose w/ -10AN fittings– One straight fitting and one 90 degree swivel fitting(1) – M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)(2) – -10AN Fittings(2) – Dowty Oil Seals(1) – Large O-Ring(2) – 1/8″ NPT Allen Key Plugs(2) – Sandwich plate adapters
Braided Hose Fittings-10AN
Sandwich Plate Fittings-10AN
AEM 26-3000C Charge Pipe Kit for SUBARU WRX 2015+ (FA20DIT)
DEFI DF06602 Red Racer oil or fuel pressure gauge (PSI) 52mm
STOPTECH 950.47507 Stainless steel brake lines for Subaru Impreza STI (Rear only)